KS Kolbenschmidt

Tribological progress on today's commercial vehicle pistons

In the wake of legislation and a generally sharper environmental awareness, there is worldwide insistence on reducing fuel consumption and emissions not only for passenger cars but also especially for today's economically operating commercial vehicle engines. An important factor in lowering emissions is the reduction of friction losses.

This is where a closely coordinated piston system comprising the piston itself, the piston rings, cylinders, piston pin and connecting rod plays a critical role. In recent years, KS Kolbenschmidt GmbH has repeatedly expanded its systems competence in the area of friction reduction. In the course of simulation tests and on its own inhouse friction test bench with the engine running, the whole assembly comprising the aforementioned parts is fine-tuned in terms of geometries, surface finish, shape and coating to match the required operating conditions. In this way, the various piston designs facilitate individual custom-tailored solutions.


This piston manufacturer is transferring its many years of car experience to commercial vehicle applications. Thus, besides optimized-friction pistons, smooth wire-sprayed cylinder surfaces (RSW coating) have been in series production for some time now. The experience acquired has shown that wire-sprayed cylinder surfaces combined with pistons rings with a hard coating, e.g. of diamond-like carbon (DLC) result in significant friction reduction as is evident in the engine map. KS Kolbenschmidt currently offers this technology in the form of prototypes also for commercial vehicle engines.
These special, very low-friction piston rings are being developed together with alliance partner Riken. Simulations have shown that, compared with current series production, the optimized piston assembly develops around 25 percent less friction at the same low oil consumption. The CO2 savings have been wholly confirmed by an OEM in carrying out consumption measurements on a fully assembled engine for its concept selection model year US'21. The low-weight Weldteks piston for light commercial vehicles has also been optimized for minimum friction in terms of cross-sectional characteristics and piston profile. Rounding off the package is the low-friction Nanofriks shaft coating.


Light-weight piston assemblies
The tribology of the individual parts and their interactive fine-tuning is a complex challenge involving a host of correlations. At present, KS Kolbenschmidt is in the process of verifying the friction reductions by measurements on its own floating-liner test bench. The compact Weldteks piston design additionally opens up the potential of significantly reducing engine weight through a smaller engine block height.

Interplay of piston rings and cylinder
A simulation of the ring-cylinder system has resulted in further progress. In tribometer tests, a combination of thick DLC coating from alliance partner Riken and KS Kolbenschmidt's own RSW coating has shown a faster transition to the hydrodynamic friction phase compared with competitive systems. A check of the optimized production processes confirmed the friction advantages shown in the development phase. In all, the piston ring-cylinder simulation shows some thirty percent less friction and hence that the system plays a major role in lower fuel consumption.

Friction reduction with Crownteks
Further friction-reduction options are provided by the extremely light-weight Crownteks piston specially developed for commercial vehicles by KS Kolbenschmidt and scheduled for series production for the first time in 2018.

This type of piston allows the compression height to be lowered even further for a reduction of the contact surfaces in cylinder component interaction and hence less friction. On the overall piston assembly, the advantages of the optimized cylinder working surface interacting with the low-friction piston rings can be combined.

On both Weldteks and Crownteks pistons, the newest possibilities of optimized piston cooling allow a reduction in the volumes of piston cooling oil required. Hence, the oil pump can be downsized for a further reduction in friction inside the engine.

Use of cookies and data protection

Rheinmetall Automotive uses cookies saved to your device in order to optimize and continuously improve its websites, as well as for statistical purposes. Further information on our use of cookies can be found here, together with our publication details and data protection notice.

By clicking on “OK” you confirm that you have taken note of the information on cookies, the data protection declaration and the publication details. You can also change your cookie settings for this website at any time.

Privacy settings

We place great importance on transparent information relating to all aspects of data protection. Our website contains detailed information on the settings you can select and what effect these settings have. You can change your selected settings at any time. Regardless of the selection you choose, we will not draw any conclusions regarding you as a person (except where you have explicitly entered your details). For information on deleting the cookies, please see the help function in your browser. You can find out more in the data protection declaration.

Change your privacy settings by clicking on the corresponding buttons

Necessary

Cookies essential for the system ensure that the website works correctly. Without these cookies, malfunctions or error messages may occur.

This website will:

  • Store cookies required by the system
  • Store the settings you make on this website

This site will never do the following without your agreement:

  • Store your settings, such as the language selection or cookie banner, so that you do not have to repeat them in the future.
  • Evaluate visits anonymously and draw conclusions to help us to optimize our website.
  • Draw conclusions regarding you as a person (except where you have explicitly entered your details, e.g. in contact forms)

Convenience

These cookies make the website easier to use and save settings, for example, so that you do not have to repeat them every time you visit the site.

This website will:

  • Store cookies required by the system
  • Store your settings, such as the language selection or cookie banner, so that you do not have to repeat them in the future.

This site will never do the following without your agreement:

  • Evaluate visits anonymously and draw conclusions to help us to optimize our website.
  • Draw conclusions regarding you as a person (except where you have explicitly entered your details, e.g. in contact forms)

Statistics

Statistics cookies enable us to evaluate the usage behaviour on the website anonymously – without enabling any conclusions to be drawn about you as a person. This enables us to measure the performance of the website and to improve it continuously to offer a better user experience.

This website will:

  • Store cookies required by the system
  • Draw conclusions regarding you as a person (except where you have explicitly entered your details, e.g. in contact forms)
  • Evaluate visits anonymously and draw conclusions to help us to optimize our website.

This site will never do the following without your agreement:

  • Draw conclusions regarding you as a person (except where you have explicitly entered your details, e.g. in contact forms)

Of course, we will always respect the do-not-track (DNT) setting in your browser. In this case, no tracking cookies are set and no tracking functions are loaded.